|
|
|
|
Tank cleaning nozzles |
|
Tank cleaning nozzles are a key element in the cleaning process. They have been designed and developed to ensure that your tanks are cleaned effectively in the shortest possible time with a minimum consumption of cleaning media.
The nozzles ensure a high degree of efficiency with their far reaching, low pressure, high impact jets, which produce a precise 360-degree indexed pattern. The nozzles are particularly remarkable because they use the re-circulated cleaning media.
The nozzles are produced in a variety of designs depending on their application. Your choice depends on the tank type, size and contents.
|
|
|
The nozzles are installed in two ways. You can install them in fixed roof or floating roof tanks through existing man-ways or openings, permanently or temporarily. Or install them through specifically made cold-tapped holes.
Watch our small video-clips and photos
• Watch this video simultating the unique washing pattern of the nozzles (Quick Time 2,535 KB).
• Watch the video showing a tank cleaning nozzle in action and see how effectively it works (Quick Time 6,019 KB).
• View the photos of the tank cleaning nozzles.
Download Quick Time® if you are not able to run the sequences.
Below, you can read more about the individual tank cleaning nozzles. You need Acrobat Reader to access the PDF-files. |
|
|
SNS-200 |
|
|
|
Suitable for |
Floating roof tanks containing crude oil and heavy fuel oil |
|
Max throw length |
14-22 m (46-72 ft) (effective) |
|
Installation |
Fixed |
|
Materials |
Stainless steel 304, bronze, AISI 316, Viton, NBR |
|
Working pressure |
3-15 bar (43,5-217 psi) |
|
Data sheet |
Download PDF (136 KB) | |
|
|
TZ-68 |
|
|
Suitable for | Fixed roof tanks containing oil products | Max throw length | 4-13 m (13-43 ft) (effective) | Installation | Fixed or portable | Materials | AISI 316L, PTFE, PEEK, Tefzel | Working pressure | 5-12 bar (72-174 psi) | Data sheet | Download PDF (142 KB) |
|
|
|
T-73 |
|
|
|
Suitable for |
Fixed roof tanks containing oil products |
|
Max throw length |
4-13 m (13-43 ft) (effective) |
|
Installation |
Fixed |
|
Materials |
Bronze, AISI 316L, PTFE, Carbon, Tefzel |
|
Working pressure |
5-12 bar (72-174 psi) |
|
Data sheet |
Download PDF (138 KB) | |
| Oreco A/S reserves the right to change specifications at any time without prior notice. |
|
|
 Top
|
|
Print